Memory - Physical Memory Available alarm

This can result in:

• Applications being unable to secure additional memory.
• New programs being unable to open successfully.
• General performance degradation due to excessive paging.

When this alarm is current:

• Look at the Windows Server | Processes drilldown | Processes page. Check the Phys MB column for processes using excessive amounts of memory. You can:
  • Close those applications using excessive memory.
  • Change the maximum memory usage setting for those applications using excessive memory. Refer to the relevant documentation to find out if this setting is supported by the application.

• Purchase more physical memory for your system.

• Determine if any programs have a memory leak. To do this:

  1. Restart your machine to ensure fresh memory usage by all applications.
  2. Use the Microsoft Performance Monitor tool and set the update interval to 10 minutes.
  3. Add the Working Set Peak counter for all applications from the Process object.
  4. Leave the application running on the system overnight.
  5. If there is a memory leak that can be viewed in a day, it will show up with the Working Set Peak chart for one of the applications rising smoothly. If the results are inconclusive after a day, some system applications that have a memory leak may exhibit the behavior over a week or more. Adjust the update interval to accommodate the extended period (update once per hour or more).